Skip to main navigation.

Generator Facts

  • Electricity, once a luxury, is now essential. To beat weather-related electrical outages, many households and businesses are investigating back-up power generators for use in an emergency.
  • Generators are widely available in a range of sizes and configurations. Some come equipped with gasoline, diesel or propane engines. Others operate from the power takeoff attachment found on many tractors. These devices all have one thing in common—they produce electricity at levels high enough to cause injury, death and property damage. That does not mean they should not be used. But, like any other electrical equipment, they must be correctly sized and properly installed. Generators are rated by the wattage they produce—usually expressed in kilowatts—and are sized according to the loads they need to serve.
  • To determine the size of the generator needed, total the rated watts of the appliances and fixtures you will want to operate during an outage. Some loads are easy to determine—a 100-watt light bulb, for example, uses 100 watts. Ten 100-watt bulbs would require 1,000 watts or one kilowatt. The power requirements for appliances are often provided in the operating manual.
  • While the power needs of individual appliances vary, those that produce heat or use large motors tend to require higher wattage. Power need for motors, such as those powering well pumps, furnace fans and refrigerators and freezers are more difficult to determine. Electric motors require more current when starting than they do in continuous operation. Without sufficient starting power, motors may overheat, burn out or trip the generator's circuit breaker.
  • In most instances, it will not be economical or practical to try to supply the entire usual electrical needs of a home or business from a standby generator. Instead, only selected, essential loads should be served from the generator to serve the minimum possible heating, refrigeration, water supply and lighting loads. More important than sizing is correct installation. Auxiliary power sources must be completely isolated from the cooperative's lines attached to your meter to avoid backfeeding into your cooperative's system.
  • During an outage, line crews trying to restore power—or anyone who contacts a downed line—could be seriously injured or killed by backfeed from an improperly installed generator. A special switch is used to transfer a building's wiring from normal to a standby power source. The device—called a double-throw switch—is designed to prevent a generator's output from backfeeding through the cooperative's transformers and lines. The switch makes it impossible to connect the main power source to the generator. The use of a double-throw switch is required by the National Electric Code when connecting an auxiliary power source to an existing system.
  • If you are considering installing an emergency back-up generator, contact a generator equipment dealer and a licensed electrician. They can help you select a system that will safely provide temporary power when needed without creating additional problems or hazards.
  • Every year, people are killed by carbon monoxide poisoning caused by operating generators within their homes or near a window or door. Please be safe, always operate generators outside with adequate ventilation.

A double-throw switch must be installed to ensure that electricity from your generator does not backfeed onto your cooperative's power lines where it can cause injury or death to cooperative line personnel repairing lines or any person who happens to be in contact with a power line when you start your generator.

Powered by Touchstone Energy Cooperatives Logo
Kids Energy Zone Cooperative Action Network Call 811 Before you dig